AEM BRASS PRESSURE SENSOR 150PSIG

Brass Gauge style (PSIg) Pressure Sensors
AEM offers brass PSIg sensors in 15, 100 and 150.
Gauge style pressure sensors reference pressure above atmospheric pressure.
When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig.
Gauge style pressure sensors are commonly used for oil pressure, fuel pressure, brake pressure, nitrous pressure etc.
Which Pressure Sensor is right for you?
There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool.
For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used.
The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:
Brass Pressure Sensor = RulerUse a Brass Pressure Sensor where you need a good reference to what pressure is being seen.Example: Brass Pressure Sensor used for a Boost Gauge – Reference/Information for knowing manifold pressure, not for ECU calibration.
Stainless Pressure Sensor = CaliperUse a SS Pressure Sensor where you need exact details of the pressure.Example: MAP Sensor information for the ECU – Calibration/crucial information for the ECU.
30-2131-150 – 150 PSIg Brass Sensor Kit:

Accuracy: +/- 3% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
Operating Temp: -40C to 105C / -40F to 221F
Burst Pressure: 300PSI
Response Time: < 1ms Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes Sensor Body: Brass Wetted Materials: 304L & 316L Stainless Steel Thread: 1/8" NPT Male Thread Weight: < 85 Grams Supply Current: Output: .5 to 4.5Vdc Linear Elec.
Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
Includes: 150 PSIg Brass Sensor, Connector, Pins & Pin Lock

No Technical Information available for this product

No Product Reviews available for this product

No Related Products for this product